FileZerver release V04.00.04 is now available for download for
firmware update of Cyclone 2+ boards using the admin "Firmware
Update" web page, ZerverView, or FTP, in file fzi0402.bin.


Major Change for V04.00.04 --

Additional Gigabit PCI adapters are now handled.

	Brand           pci-id  Model     Status
	D-Link          4c00    DGE-530T  tested
	LinkSys	        1032    EG-1032   tested
	LinkSys         1064
	3COM            1700
	CNet            434e
	SysKonnect      4300
	SysKonnect      4320
	Marvell         4320

Previously, only Intel E1000 Gigabit PCI cards were supported.
Those cards that have worked in the past will continue to work,
however newer versions of the Intel Gigabit PCI cards require driver
changes that have not been adapted.


Change for V04.00.03 --

There is overheat protection within a FileZerver.  If the CPU
temperature exceeds 60C, a clean shutdown is initiated so that
the data will be protected.  (A CPU operating in serious overheat
conditions may become unreliable, putting the data at risk.)

In V04.00.03 an additional check was added to the overheat-detection
code.

January 20, 2004